Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

I have a 99 mk1 tdi and the aux heater doesn't work.

I've read lots on here about possible causes so tonight I've been sat in the cold trying to get my vcds lite to communicate with it but it won't.

Do I have to buy the full version to check or clear any codes associated with the aux heater or should it connect

I'm able to check engine etc so I'm connected to the ecu

Posted
The auxiliary heater on the MK1 is dumb so does not connect with the car's diagnostics, most likely culprit is the glow plug so you will need to remove heater to test/replace once you done that job done, no codes to clear.
Posted
I assume you are refering to the booster heater. VCDS will not communicate with booster heater on Mk1. As far as I am aware, any fault codes logged will erase when ignition is turned off. To diagnose faults you will need to test with a multi meter at the connector block. Most failures are the glow plug. The diesel dosing pump can fail, terminals corrode.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...